Wenn Sie sich noch anstrengend um die Symantec 250-251 Zertifizierungsprüfung bemühen, dann haben Sie einen großen Fehler gemacht. Durch fleißiges Lernen können Sie sicher die Prüfung bestehen. Aber Sie können vielleicht das erwartete Ziel vielleicht nicht erreichen. Im Zeitalter des Internets gibt es zahlreiche erfolgreiche IT-Zertifizierungen. Die Schulungsunterlagen zur Symantec 250-251 Zertifizierungsprüfung von Pass4Test sind sehr gut. Sie sind zielgerichtet und verprechen Ihnen, die Prüfung zu bestehen. Diese Schulungsunterlagen sind nicht nur rational, sondern erspart Ihnen auch viel Zeit. Sie können mit der ersparten Zeit etwas anderes lernen. So können Sie bessere Resultate bei weniger Einsatz erzielen.
Die Schulungen für die Vorbereitung der Symantec 250-251 Zertifizierungsprüfung beinhalten die Simalationsprüfungen sowie die jetzige Prüfung zur Symantec 250-251 Zertifizierungsprüfung. Im Internet haben Sie vielleicht auch einige ähnliche Ausbildungswebsites gesehen. Nach dem Vergleich würden Sie aber finden, dass die Schulungen zur Symantec 250-251 Zertifizierungsprüfung von Pass4Test eher zielgerichtet sind. Sie sind nicht nur von guter Qualität, sondern sind auch die umfassendeste.
Um der Anforderung des aktuellen realen Test gerecht zu werden, aktualisiert das Technik-Team rechtzeitig die Fragen und Antworten zur Symantec 250-251 Zertifizierungsprüfung. Wir akzeptieren immer Rückmeldungen von Benutzern und nehmen viele ihre Vorschläge an, was zu einer perfekten Schulungsmaterialien zur Symantec 250-251-Prüfung. Dies ermöglicht Pass4Test, immer Produkte von bester Qualität zu besitzen.
Exam Code: 250-251
Prüfungsname: Administration of HA Solutions for UNIX (VCS 5.0)
Aktulisiert: 2013-10-27
Nummer: 208 Q&As
100% Garantie Administration of HA Solutions for UNIX (VCS 5.0) Prüfungserfolg. Wenn Sie Pass4Test 250-251 Prüfung wählen Symantec Pass4Test Test Engine ist das perfekte Werkzeug, um auf die Zertifizierungsprüfung vorbereiten. Erfolg kommt einfach, wenn Sie bereiten mit Hilfe von Original bis zu Administration of HA Solutions for UNIX (VCS 5.0) Produkte mit Pass4Test Datum. Wie ein seltener Fall, wenn Sie es versäumen, diese Prüfung geben wir Ihnen eine volle Rückerstattung Ihres Einkaufs passieren.
250-251 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/250-251.html
NO.1 Which statement is true about the violation trigger?
A.A violation trigger must be written as a shell script.
B.A violation trigger and notification are mutually exclusive.
C.A violation trigger is dependent on notification to work.
D.A violation trigger is automatically executed when events occur.
Answer:D
Symantec prüfungsfrage 250-251 zertifizierung 250-251
NO.2 Which resource type attributes can be set in order to tune VCS failover characteristics? (Choose two.)
A.Flags
B.RestartLimit
C.ToleranceLimit
D.OfflineTimeout
E.OfflineMonitorInterval
Answer:B C
Symantec originale fragen 250-251 prüfungsfrage 250-251 zertifizierungsfragen 250-251 dumps 250-251 testantworten
NO.3 When preparing to install VCS on the S1 and S2 systems, what should you do to verify software
compatibility? (Choose three.)
A.check the VCS release notes for supported software
B.run the installvcs recheck S1 S2 command
C.let the installvcs script check compatibility at install
D.run the installvcs ompat S1 S2 command
E.check the Symantec Enterprise Support website
Answer:A B E
Symantec 250-251 prüfungsfragen 250-251 250-251 testantworten 250-251
NO.4 Which resource type attributes can be set in order to tune VCS failover characteristics? (Choose two.)
A.AutoStart
B.ConfInterval
C.ConfTimeout
D.MonitorInterval
E.OfflineMonitorInterval
Answer:B D
Symantec originale fragen 250-251 zertifizierungsantworten 250-251 250-251 250-251 antworten
NO.5 Which components are installed when you execute the installvcs script? (Choose two.)
A.bundled agents
B.database agents
C.cluster file system
D.GAB driver
E.cluster volume manager
Answer:A D
Symantec prüfung 250-251 250-251 250-251 zertifizierungsfragen
NO.6 Under which condition can a service group be AutoDisabled?
A.when hashadow cannot restart HAD on a system
B.when the system is in a jeopardy membership
C.when a firm service group dependency exists between two service groups and the parent service group
fails
D.when a firm service group dependency exists between two service groups and the child service group
fails
Answer:A
Symantec 250-251 zertifizierungsfragen 250-251
NO.7 You are adding a system to a running cluster. You have successfully performed these steps on the
system that you are adding: 1. installed, configured, and tested all application resources required 2.
installed VCS 3. configured and started VCS communications (LLT and GAB) What is the next step that
you perform?
A.update the resource attributes to enable resources to run on the new system
B.update the service group attributes to enable groups to run on the new system
C.change the cluster attribute for VCS user names to match accounts on the new system
D.change the owner of the system attributes so that all cluster systems are the same
Answer:B
Symantec prüfungsunterlagen 250-251 250-251 zertifizierung 250-251
NO.8 VCS is to be installed in a secure environment where remote installation between systems is
impossible. The VCS configuration parameters were captured in a file using the installation script on the
first system. What can be used to read the contents of the configuration file when executing locally on the
remaining systems?
A.-autoconfig
B.-configfile
C.-vcsconfig
D.-responsefile
Answer:D
Symantec echte fragen 250-251 echte fragen 250-251
NO.9 Which conditions are recommended for a successful VCS patch installation? (Choose two.)
A.The clustered application must be shut down.
B.VCS must be shut down only on the server being patched.
C.VCS must be shut down on all cluster nodes.
D.GAB and LLT must be shut down on all cluster nodes.
E.GAB and LLT must remain running and connected.
Answer:C D
Symantec zertifizierung 250-251 250-251 zertifizierungsfragen 250-251 250-251
NO.10 Which feature of VCS can prevent overloading of a system's resources in the event of service group
failover?
A.Parallel Service Groups
B.Capacities
C.Limits
D.Load Failover Policy
Answer:C
Symantec 250-251 originale fragen 250-251 prüfungsfragen 250-251
NO.11 Which attribute enables VCS to bring a resource online after it goes offline unexpectedly and before
faulting the resource?
A.RestartLimit
B.OnlineRestartLimit
C.AutoRestartLimit
D.OnlineRetryLimit
Answer:A
Symantec antworten 250-251 zertifizierungsantworten 250-251 prüfungsunterlagen 250-251 antworten
NO.12 Which attributes impact service group failover? (Choose three.)
A.FailOver
B.AutoFailOver
C.Faulted
D.FaultPropagation
E.Frozen
Answer:B D E
Symantec 250-251 250-251 prüfungsfrage 250-251 250-251
NO.13 Which directive in the llttab file defines a network interface for a heartbeat?
A.nic
B.link
C.heartbeat
D.hbdev
Answer:B
Symantec zertifizierungsfragen 250-251 zertifizierung 250-251 zertifizierungsfragen 250-251
NO.14 Which VCS resource attribute setting prevents VCS from interpreting a Monitor entry point timeout as a
resource fault?
A.MonitorFault=0
B.MonitorFaultTimeout=240
C.FaultMonitor=240
D.FaultOnMonitor=4
Answer:D
Symantec prüfungsfragen 250-251 250-251 zertifizierungsfragen 250-251 prüfungsunterlagen 250-251
NO.15 Which procedure must be followed to remove the resource type TypeA from an active VCS cluster?
A.remove all resources of TypeA, remove TypeA, and remove TypeA packages
B.remove TypeA, then execute the hatype esync command
C.stop VCS, remove all resources of TypeA, and start VCS
D.execute the hatype -remove command which will remove all the resources
Answer:A
Symantec dumps 250-251 250-251 250-251 prüfung 250-251 zertifizierungsfragen
NO.16 You are installing a VCS upgrade that does not require a system reboot, but does require a VCS
restart. Which method maximizes user access to the clustered applications during the upgrade?
A.use the VCS rolling upgrade option which restarts VCS transparently
B.stop VCS using the orce option and then restart VCS on each system
C.evacuate service groups while upgrading one system at a time
D.stop VCS using the all option and then restart VCS on each system
Answer:B
Symantec exam fragen 250-251 testantworten 250-251 antworten 250-251 250-251
NO.17 What is the default level of authorization of a new VCS user?
A.Cluster Administrator
B.Cluster Operator
C.Cluster Guest
D.Group Administrator
E.Group Operator
Answer:C
Symantec prüfung 250-251 prüfungsfrage 250-251 prüfungsfragen
NO.18 Which text files are created at the end of a successful run of installvcs -installonly? (Choose three.)
A.log
B.response
C.gabtab
D.llttab
E.summary
Answer:A B E
Symantec 250-251 250-251 250-251 zertifizierungsantworten
NO.19 During a test of a NIC resource the VCS engine log indicates that the service group and the IP resource
enter the FAULTED state on all systems in the cluster. The NIC resource enters the ONLINE state after
the root cause of the fault is corrected. Which default attribute setting allows the service group to attempt
to start without manual intervention?
A.AutoStart
B.AutoClear
C.AutoRestart
D.AutoFailover
Answer:C
Symantec 250-251 zertifizierung 250-251 dumps
NO.20 Which types of monitoring can be performed on Oracle resources? (Choose two.)
A.detail monitoring
B.basic level monitoring
C.kernel level monitoring
D.specific monitoring
E.service monitoring
Answer:A B
Symantec exam fragen 250-251 250-251 250-251
Wenn Sie die Schulungsunterlagen zur Symantec 250-251 Zertifizierungsprüfung von Pass4Test haben, geben wir Ihnen einen einjährigen kostenlosen Update-Service. Das heißt, Sie können immer neue Zertifizierungsmaterialien bekommen. Sobald das Prüfungsziel und unsere Lernmaterialien geändert werden, benachrichtigen wir Ihnen in der ersteen Zeit. Wir kennen Ihre Bedürfnisse. Wir haben das Selbstbewusstsein, Ihnen zu helfen, die Symantec 250-251 Zertifizierungsprüfung zu bestehen. Sie können sich unbesorgt auf die Prüfung vorbereiten und das Zertifikat erfolgreich bekommen.
没有评论:
发表评论