Viele IT-Fachleute wollen die Juniper JN0-130 Zertifizierungsprüfung bestehen, so dass sie im IT-Branche befördert, ihre Lebensverhältnisse verbessert und ihr Gehalt erhöht werden.Viele Leute haben viel Zeit und Energie für die Juniper JN0-130 Zertifizierungsprüfung verwendet, trotzdem fallen sie in der Prüfung durch. Es ist gar nicht kostengünstig. Wenn Sie Pass4Test wählen, können Sie viel Zeit und Energie ersparen und zwar die Prüfung erfolgreich bestehen. Denn die zielgerichteten Prüfungsmaterialien wird Ihnen helfen, die Prüfung 100% zu bestehen. Falls Sie in der Prüfung durchfallen, zahlen wir Ihnen die gesammte Summe zurück.
Die Produkte von Pass4Test werden von den erfahrungsreichen IT-Fachleuten nach ihren Kenntnissen und Erfahrungen bearbeitet. Wenn Sie sich an der Juniper JN0-130 Zertifizierungsprüfung beteiligen, wählen Sie doch Pass4Test. Pass4Test bietet Ihnen umfassende Prüfungsmaterialien vo guter Qualität, so dass Sie sich gut auf die fachliche Prüfung vorbereiten und das JN0-130 Zertifikat erhalten.
Die Schulungsunterlagen zur Juniper JN0-130 Zertifizierungsprüfung von Pass4Test werden die größten Erfolgsquote erzielen. Naben den Büchern sind heutztage das Internet als ein Wissensschatz angesehen. In Pass4Test können Sie Ihren Wissensschatz finden. Das ist eine Website, die Ihnen sehr helfen können. Sie werden sicher komplizierte Übungen treffen, Unser Pass4Test wird Ihnen helfen, die Prüfung ganz einfach zu bestehen, weil es alle notwendigen Kenntnisse zur Juniper JN0-130 Zertifizierungsprüfung enthält.
Die Pass4Test Website haben guten Ruf in Juniper JN0-130 Zertifizierungsprüfungen. Das ist auch die Tatsche, die viele Leute kennen. Die Pass4Test sind nach Ihren starken dumps gut anerkannt. Wenn Sie die als das Vorbereitungsgerät benutzen, können Sie gute Ergebnisse für die Juniper JN0-130 Zertifizierungsprüfung bekommen. Downloaden Sie das kostlose Muster, dann können Sie wissen, dass diese Auswahl richtig ist.
Exam Code: JN0-130
Prüfungsname: Juniper networks Certified internet specialist.e(jncis-e)
Aktulisiert: 2014-01-31
Nummer: 128 Q&As
Die Juniper JN0-130 Zertifizierungsprüfung stellt eine wichtige Position in der IT-Branche. Viele IT-Experten sind sich einig. Die Juniper JN0-130 Zertifizierungsprüfung zu bestehen ist jedoch nicht einfach. Es erfordert umfangreiche Fachkenntnisse und Erfahrungen, weil die Juniper JN0-130 Zertifizierungsprüfung sowieso eine autoritäre Prüfung, die das Niveau der IT-Fachkenntnissen überprüft. Wenn Sie das Juniper JN0-130 Zertifikat bekommen, wird Ihre Fähigkeit von den Firmen akzeptiert. Das bedeutet, dass die zielgerichteten Schulungsunterlagen von Pass4Test sehr wirksam ist. Mit unseren Schulungsmaterialien können Sie 100% die Prüfung bestehen.
Dynamischen Welt von heute lohnt es sich, etwas für das berufliche Weiterkommen zu tun. Angesichts des Fachkräftemangels in vielen Branchen haben Sie mit einer Juniper Zertifizierung mehr Kontrolle über Ihren eigenen Werdegang und damit bessere Aufstiegschancen.
Sie sollen Methode zum Erfolg, nicht Einwände für die Niederlage finden. Es ist doch nicht so schwer, die Juniper JN0-130 Zertifizierungsprüfung zu bestehen. Die Schulungsunterlagen zur Juniper JN0-130 Zertifizierungsprüfung von Pass4Test zu wählen ist eine gute Wahl, die Ihnen zum Bestehen der Prüfung verhelfen. Sie sind auch die beste Abkürzung zum Erfolg. Jeder will Erfolg erlangen. Hauptsache, man muss richtige Wahl treffen.
JN0-130 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/JN0-130.html
NO.1 Which two types of routes may be advertised via EBGP? (Choose two.)
A. Routes that do not originate in the local AS and are learned by OSPF.
B. Routes that originate on the local router and are advertised into OSPF.
C. Routes that are transiting the local router and are BGP learned routes.
D. Routes that originate on the local router and are injected using a route map.
Answer: CD
Juniper originale fragen JN0-130 JN0-130 prüfungsunterlagen JN0-130
NO.2 Which CLI command disconnects all subscribers on an ATM PVC?
A. clear port 4/3.99
B. logout port 4/3.99
C. clear subscriber port 4/3.99
D. logout subscriber port 4/3.99
Answer: D
Juniper echte fragen JN0-130 prüfung JN0-130 zertifizierungsfragen JN0-130 testantworten JN0-130 JN0-130 prüfungsfrage
NO.3 Which CLI command displays the VRFs that are operational within each virtual router?
A. show vir
B. show ip vrf
C. show vrf vir
D. show mpls vrf
Answer: A
Juniper zertifizierung JN0-130 JN0-130 originale fragen
NO.4 Which three statements about Label-Switched Paths (LSPs) are true? (Choose three.)
A. LSPs are bidirectional.
B. LSPs are unidirectional.
C. LSPs can be signaled by CAC.
D. LSPs can be configured explicitly.
E. LSPs can be configured dynamically.
Answer: BDE
Juniper zertifizierungsfragen JN0-130 antworten JN0-130 exam fragen
NO.5 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D
Juniper zertifizierung JN0-130 JN0-130 JN0-130 testantworten JN0-130 testantworten
NO.6 Which CLI command displays the status of a PPP over Ethernet subinterface?
A. show pppoe interface
B. show ppp int state up
C. show ip interface brief
D. show pppoe subinterface
Answer: D
Juniper JN0-130 zertifizierungsantworten JN0-130 JN0-130 prüfungsfrage
NO.7 Which CLI command is used to set a Privileged Exec password of mypassword?
A. enable password 0 mypassword
B. enable password 3 mypassword
C. enable password 5 mypassword
D. enable password 10 mypassword
Answer: A
Juniper JN0-130 zertifizierung JN0-130 JN0-130
NO.8 Which three statements are true regarding the DHCP Internal Server? (Choose three.)
A. Can be in remote-access mode.
B. Can be in equal-access mode.
C. Can be in standalone mode.
D. Standalone mode is the default.
E. Equal-access mode is the default.
Answer: BCE
Juniper JN0-130 prüfungsunterlagen JN0-130 prüfungsfragen JN0-130 prüfungsfragen JN0-130 JN0-130 zertifizierung
NO.9 Which two services protect the ERX Edge Router from unauthorized CLI logins?
A. IPSec
B. SecureID
C. local passwords
D. default IP policy
E. RADIUS authentication
Answer: CE
Juniper prüfung JN0-130 JN0-130 exam fragen JN0-130
16. Your ERX Edge Router is constantly going to a boot## prompt.
What is the most likely cause for this condition?
A. bad SRP
B. low voltage
C. bad mid-plane
D. corrupted flash
Answer: D
Juniper JN0-130 zertifizierungsantworten JN0-130 echte fragen JN0-130 prüfungsfragen
17. Which sequence of events describes the order used to restore normal router operation after
experiencing a corrupted flash?
A. initialize flash, reload, copy new system files from FTP server
B. reload, copy new system files from FTP server, initialize flash
C. initialize flash, copy new system files from FTP server, reload
D. reload, initialize flash, copy new system files from FTP server
Answer: C
Juniper prüfung JN0-130 JN0-130 JN0-130 JN0-130
18. You are trying to recover from a corrupted flash.
Which configuration command configures an IP address of 192.168.1.1/24 on the SRP management
interface when the ERX1400 router is at the boot## prompt?
A. ip address 192.168.1.1/24
B. ip address 192.168.1.1 subnetmask 24
C. ip address 192.168.1.1 255.255.255.0
D. ip address 192.168.1.1 mask 255.255.255.0
Answer: C
Juniper JN0-130 JN0-130 zertifizierungsfragen JN0-130 JN0-130 originale fragen
19. What describes the functionality of NTP when using multiple virtual routers?
A. All virtual routers can act as NTP clients and servers.
B. Only one virtual router can act as an NTP client and a server.
C. Only one virtual router can act as an NTP server but all can be clients.
D. Only one virtual router can act as an NTP client but all can be servers.
Answer: D
Juniper exam fragen JN0-130 JN0-130
20. Which configuration command is used to make the ERX Edge Router an NTP server?
A. set ntp-server
B. set ntp server
C. ntp-server enable
D. ntp server enable
Answer: D
Juniper zertifizierung JN0-130 prüfung JN0-130 zertifizierung JN0-130 prüfungsfrage
21. Which configuration command allows a virtual router to receive updates from a configured NTP
source?
A. ntp enable
B. enable ntp
C. set ntp-client
D. enable ntp-client
Answer: A
Juniper JN0-130 JN0-130 testantworten JN0-130 prüfung
22. Which configuration command is used to send debug level events to the console in real time?
A. log here severity debug
B. log destination console severity debug
C. log severity debug destination console
D. log realtime destination console severity debug
Answer: B
Juniper JN0-130 zertifizierungsfragen JN0-130 prüfungsfragen JN0-130 zertifizierungsfragen
23. Which command initiates a packet trace for all PPP packets on interface atm 6/1.33 ?
A. log filter debug pppPacket atm 6/1.33
B. log severity debug pppPacket atm 6/1.33
C. log filter debug category pppPacket atm 6/1.33
D. log severity debug category pppPacket atm 6/1.33
Answer: B
Juniper JN0-130 zertifizierung JN0-130 JN0-130 JN0-130 antworten
24. Log messages are appearing very quickly on the console of your ERX Edge Router.
Which Privileged Exec command disables real-time console logging?
A. no log here
B. no log console
C. destination console severity 7
D. destination console logging off
Answer: A
Juniper zertifizierung JN0-130 JN0-130 JN0-130 testantworten
25. Which two configuration commands are required to direct debug level console logging to your current
ERX Edge Router Telnet session? (Choose two.)
A. log here
B. log telnet here
C. log destination console severity 7
D. log destination telnet severity debug
Answer: AC
Juniper prüfungsfrage JN0-130 zertifizierungsfragen JN0-130
26. A log filter of log severity DEBUG pppPacket ATM 4/3.66 is configured within the category of
pppPacket.
Which configuration command removes this specific log filter?
A. no log severity pppPacket
B. no log severity debug pppPacket
C. no log severity pppPacket atm 4/3.66
D. no log severity debug pppPacket 4/3.66
Answer: C
Juniper JN0-130 JN0-130 JN0-130
27. Which configuration command removes all log filters currently configured on the ERX Edge Router?
A. no log here
B. no log fields
C. no log filters
D. no log severity
Answer: C
Juniper exam fragen JN0-130 prüfungsunterlagen JN0-130 originale fragen JN0-130 JN0-130 JN0-130
28. Which three statements describe macros on the ERX Edge Router? (Choose three.)
A. They prompt users for input.
B. They cannot prompt users for input.
C. They can be created on the router itself.
D. They are an embedded programming language.
E. They can be created on the user's workstation.
Answer: ADE
Juniper zertifizierung JN0-130 JN0-130 prüfung JN0-130
29. Which command is used to execute a macro called setup.mac ?
A. macro setup
B. macro setup.mac
C. run macro setup
D. run macro setup.mac
Answer: B
Juniper JN0-130 zertifizierung JN0-130 JN0-130 JN0-130 JN0-130 echte fragen
30. Which control expression must be the last line in all macros?
A. <# end #>
B. <# finish #>
C. <# endtmpl #>
D. <# terminate #>
Answer: C
Juniper JN0-130 JN0-130 prüfungsfrage JN0-130
NO.10 Which two BGP attributes are incorporated for loop prevention within an AS using a route reflection
configuration? (Choose two.)
A. AS Path
B. Next Hop
C. Cluster List
D. Originator ID
Answer: CD
Juniper JN0-130 JN0-130 exam fragen JN0-130
NO.11 Which configuration command places interfaces whose IP addresses are between 192.168.0.0 and
192.168.255.255 into OSPF area 0?
A. network 192.168.0.0 255.255.0.0 area 0.0.0.0
B. network 192.168.0.0 0.0.255.255 area 0.0.0.0
C. area 0.0.0.0 network 192.168.0.0 255.255.0.0
D. area 0.0.0.0 network 192.168.0.0 0.0.255.255
Answer: B
Juniper testantworten JN0-130 JN0-130 JN0-130 antworten JN0-130 zertifizierungsfragen
NO.12 In a Bridged 1483 network, which set of commands is used to configure an ATM subinterface?
A. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip address unnumbered loopback0
B. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip unnumbered loopback0
C. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip address unnumbered loopback0
D. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip unnumbered loopback0
Answer: D
Juniper zertifizierung JN0-130 zertifizierungsantworten JN0-130 zertifizierungsantworten JN0-130 prüfungsfragen
NO.13 Which message type is used to initiate an RSVP-TE label switched path?
A. path
B. resv
C. setup
D. session
Answer: A
Juniper exam fragen JN0-130 JN0-130 JN0-130 JN0-130 echte fragen
NO.14 Is the IS-IS Designated Intermediate System (DIS) election process called Deterministic or Static and
why?
A. It is Static. If the priorities are equal for a new neighbor and the current DIS only.
B. It is Deterministic. If the well-known pseudonode and system ID is configured on the new neighbor only.
C. It is Deterministic. When a new router appears on a multi-access network with a higher priority value, it
is elected as the DIS.
D. It is Static. When a new intermediate system powers up on a multi-access network, even if it has a
higher priority, it may become a backup DIS.
Answer: C
Juniper JN0-130 originale fragen JN0-130 JN0-130 zertifizierungsfragen JN0-130 JN0-130
NO.15 You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs
each interface is using.
Which CLI command displays this information?
A. show fast interface
B. show vlan interface
C. show vlan subinterface
D. show fast interface vlan
Answer: C
Juniper JN0-130 prüfungsfrage JN0-130 JN0-130
Pass4Test bietet Ihnen die neusten 156-215.13 exam Unterlagen und 1Z0-807 pdf Fragen & Antworten mit hoher Qualität. Unser 70-684 zertifizierung und MB6-886 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative 1Z0-033 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.
Artikel Link: http://www.pass4test.de/JN0-130.html
没有评论:
发表评论