Microsoft 70-504-VB zertifizierungsfragen

Die Microsoft 70-504-VB Zertifizierungsprüfung ist zur Zeit sehr beliebt unter den IT-Fachleuten. Durch die Microsoft 70-504-VB Zertifizierungsprüfung werden Ihre Lebens-und Arbeitsverhältnisse verbessert. Daneben wird Ihre Position in der IT-Branche gefestigt.

Die Produkte von Pass4Test werden den Kandidaten nicht nur helfen, die Microsoft 70-504-VB Zertifizierrungsprüfung zu bestehen, sondern Ihnen auch einen einjährigen kostenlosen Update-Service zu bieten. Sie wird den Kunden die neuesten Prüfungsmaterialien so schnell wie möglich liefern, so dass die Kunden die Prüfunginformationen wissen. Deshalb ist Pass4Test eine erstklassige Website von guter Qualität. Außerdem ist der Service hier auch ausgezeichnet.

Es ist Ihnen weis, Pass4Test zu wählen, um die Microsoft 70-504-VB Zertifizierungsprüfung zu bestehen. Sie können im Internet teilweise die Fragen und Antworten zur Microsoft 70-504-VB Zertifizierungsprüfung von Pass4Test kostenlos herunterladen. Dann werden Sie mehr Vertrauen in unsere Produkte haben. Sie können sich dann gut auf Ihre Microsoft 70-504-VB Zertifizierungsprüfung vorbereiten. Für den Fall in der Prüfung, zahlen wir Ihnen die gesammte Summe zurück.

Wenn Sie die Fragen und Antworten zur Microsoft 70-504-VB-Prüfung von Pass4Test kaufen, können Sie ihre wichtige Vorbereitung im leben treffen und die Schulungsunterlagen von guter Qualität bekommen. Kaufen Sie unsere Produkte heute, dann öffnen Sie sich eine Tür, um eine bessere Zukunft zu haben. Sie können auch mit weniger Mühe den großen Erfolg erzielen.

Pass4Test hat die spezielle Schulungsinstrumente zur Microsoft 70-504-VB Zertifizierungsprüfung. Sie können mit wenig Zeit und Geld Ihre IT-Fachkenntnisse in kurzer Zeit verbessern und somit Ihre Fachkenntnisse und Technik in der IT-Branche beweisen. Die Kurse von Pass4Test werden von den Experten nach ihren Kenntnissen und Erfahrungen für die Microsoft 70-504-VB Zertifizierungsprüfung bearbeitet

Pass4Test ist eine Website, mit deren Hilfe Sie die Microsoft 70-504-VB Zertifizierungsprüfung schnell bestehen können. Die Übungen zur Microsoft 70-504-VB Zertifizierungsprüfung von Pass4Test werden von den Experten studiert. Wenn Sie sich noch anstrengend um die Microsoft 70-504-VB Zertifizierungsprüfung bemühen, sollen Sie die Übungen zur Microsoft 70-504-VB Zertifizierungsprüfung von Pass4Test wählen, die Ihnen große Hilfe bei der Prüfungsvorbereitung bieten.

In Bezug auf die 70-504-VB Zertifizierungsprüfung ist die Zuverlässigkeit nicht zu ignorieren. Die Schulungsmaterialien zur 70-504-VB Zertifizierungsprüfung von Pass4Test werden besonders entworfen, um Ihre Effizienz zu erhöhen. Unsere Website hat weltweit die höchste Erfolgsquote.

Exam Code: 70-504-VB
Prüfungsname: TS: MS.NET Frmewk 3.5, Workflow Foundation App Dev
Aktulisiert: 2013-11-23
Nummer: 96 Q&As

70-504-VB prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/70-504-VB.html

NO.1 You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5.
You plan to add a workflow to implement an order processing logic.
When the host initiates the order processing logic, it raises an event named StartProcessing.
You need to configure the local communication interface to enable the workflow to handle the event.
Which code segment should you use?
A. Public Interface IContract
Event StartProcessing As EventHandler(Of ExternalDataEventArgs)
End Interface
B. Public Class Contract
Inherits ExternalDataExchangeService
Private Event StartProcessing As EventHandler(Of _
ExternalDataEventArgs)
End Class
C. <ExternalDataExchange()> _
Public Interface IContract
Event StartProcessing As EventHandler(Of EventArgs)
End Interface
D. <ExternalDataExchange()> _
Public Interface IContract
Event StartProcessing As EventHandler(Of ExternalDataEventArgs)
End Interface
Answer: D

Microsoft   70-504-VB   70-504-VB   70-504-VB

NO.2 You create a workflow host application by using Microsoft .NET Framework 3.5. You use Windows
Workflow Foundation to create the application.
You need to configure the workflow runtime to ensure that all the workflow instances run asynchronously.
Which code segment should you use?
A. Dim runtime As New WorkflowRuntime()
runtime.StartRuntime()
Dim instance As WorkflowInstance = _
runtime.CreateWorkflow(GetType(CustomerWorkflow))
instance.Start()
B. Dim runtime As New WorkflowRuntime()
runtime.StartRuntime()
Dim scheduler As ManualWorkflowSchedulerService = _
runtime.GetService(Of ManualWorkflowSchedulerService)()
Dim instance As WorkflowInstance = _
runtime.CreateWorkflow(GetType(CustomerWorkflow))
scheduler.RunWorkflow(instance.InstanceId)
C. Dim runtime As New WorkflowRuntime()
Dim scheduler As New ManualWorkflowSchedulerService()
runtime.AddService(scheduler)
runtime.StartRuntime()
Dim instance As WorkflowInstance = _
runtime.CreateWorkflow(GetType(CustomerWorkflow))
instance.Start()
D. Dim runtime As New WorkflowRuntime()
runtime.StartRuntime()
Dim scheduler As New DefaultWorkflowSchedulerService()
runtime.AddService(scheduler)
Dim instance As WorkflowInstance = _
runtime.CreateWorkflow(GetType(CustomerWorkflow))
instance.Start()
Answer: A

Microsoft   70-504-VB   70-504-VB originale fragen   70-504-VB prüfungsfragen

NO.3 You create an application in which users design simple sequential workflows. The designs are stored
as XOML in a SQL database. You need to start one of these sequential workflows from within your own
workflow.
What should you do?
A. Include a custom activity with a code segment that includes an invocation to the CreateWorkflow
method of the WorkflowRuntime class and then starts the workflow. The signature of the CreateWorkflow
method invoked uses only the workflowType parameter.
B. Include a custom activity with a code segment that includes an invocation to the CreateWorkflow
method of WorkflowRuntime class and then starts the workflow. The signature of the CreateWorkflow
method invoked uses only the XmlReader and workflowDefinitionReader parameters.
C. Include a custom activity with a code segment that includes an invocation to the CreateWorkflow
method of the WorkflowRuntime class and then starts the workflow. The signature of the CreateWorkflow
method invoked uses only the workflowType, Dictionary<string,Object> namedArgumentValues, and Guid
instanceId parameters.
D. Include and configure an InvokeWorkflow activity
Answer: B

Microsoft   70-504-VB   70-504-VB   70-504-VB prüfung

NO.4 You are creating a workflow application by using Microsoft .NET Framework 3.5. The application uses
local communication.
The workflow host must receive data from an existing workflow instance.
You need to define the communication between the workflow host and the workflow instance.
Which code segment should you use?
A. <ExternalDataExchange()> _
Public Interface ICommunicationService
Sub CallHost(ByVal someData As String)
End Interface
B. <ExternalDataExchange()> _
Public Interface ICommunicationService
Event CallHost As EventHandler(Of ExternalDataEventArgs)
End Interface
C. Public Class CommunicationService
Inherits ExternalDataExchangeService
Public Event CallHost As EventHandler(Of ExternalDataEventArgs)
End Class
D. Public Class CommunicationService
Inherits ExternalDataExchangeService
Public Sub CallHost(ByVal someData As String)
MyBase.AddService(Me)
End Sub
End Class
Answer: A

Microsoft zertifizierungsfragen   70-504-VB prüfungsfragen   70-504-VB dumps   70-504-VB originale fragen   70-504-VB   70-504-VB

NO.5 You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5.
The application uses a markup-only workflow.
The workflow will also require the use of a code-beside file.
The following code fragment is implemented in XAML.
<SequentialWorkflowActivityx:Class="ProcessNewCustomer" Name="ProcessCustomer" xmlns=
"http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
</SequentialWorkflowActivity>
You need to create a class declaration to implement the custom code.
Which code segment should you use?
A. Partial Public Class ProcessNewCustomer
Inherits SequentialWorkflowActivity
' Class implementation code appears here.
End Class
B. Public Class ProcessNewCustomer
Inherits SequentialWorkflowActivity
' Class implementation code appears here.
End Class
C. Public Class ProcessNewCustomerCode
Inherits ProcessNewCustomer
' Class implementation code appears here.
End Class
D. Partial Public Class ProcessCustomer
Inherits SequentialWorkflowActivity
' Class implementation code appears here.
End Class
Answer: A

Microsoft zertifizierung   70-504-VB zertifizierung   70-504-VB prüfungsfrage   70-504-VB

NO.6 You are creating a workflow host application by using Microsoft .NET Framework 3.5. You use
Windows Workflow Foundation to create the application.
You need to ensure that the host application can receive method calls from the workflow instances.
Which code segment should you use?
A. Dim loaderService As WorkflowLoaderService = New _
DefaultWorkflowLoaderService()
workflowRuntime.AddService(loaderService)
B. Dim dataService As New ExternalDataExchangeService()
workflowRuntime.AddService(dataService)
C. Dim scheduler As New ManualWorkflowSchedulerService()
workflowRuntime.AddService(scheduler)
D. Dim sqlService As New SqlWorkflowPersistenceService("<conn str>")
workflowRuntime.AddService(sqlService)
Answer: B

Microsoft antworten   70-504-VB prüfung   70-504-VB   70-504-VB

NO.7 You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5.
You plan to call a method in the workflow host to send messages.
You write the following code segment.
Public Interface IOrderCommunication
Sub UpdateOrder(ByVal orderId As String)
End Interface
You need to decorate the interface.
Which line of code should you use?
A. <LocalizableAttribute(true)>
B. <ExternalDataExchangeAttribute>
C. <CorrelationParameterAttribute("orderId")>
D. <ActivityCodeGeneratorAttribute("orderId")>
Answer: B

Microsoft   70-504-VB   70-504-VB exam fragen   70-504-VB dumps   70-504-VB prüfungsunterlagen

NO.8 New CodePrimitiveExpression(newAmount)

NO.9 A custom activity defined in an assembly named LitwareActivities is defined as follows:
Namespace LitwareActivities
Public Class WriteLineActivity
Inherits Activity
Protected Overrides Function Execute(ByVal executionContext As
System.Workflow.ComponentModel.ActivityExecutionContext) _
As System.Workflow.ComponentModel.ActivityExecutionStatus
Console.WriteLine(Message)
Return ActivityExecutionStatus.Closed
End Function
Private aMessage As String
Public Property Message() As String
Get
Return aMessage
End Get
Set(ByVal value As String)
aMessage = value
End Set
End Property
End Class
End Namespace
You need to create a sequential workflow where the execution path can be generated on the fly by an
application.
Which XML code segment should you use?
A. <SequentialWorkflowActivity
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</SequentialWorkflowActivity>
B. <Workflow
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</Workflow>
C. <Workflow
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
class:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</Workflow>
D. <SequentialWorkflowActivity
class:Litware="clr-namespace:LitwareActivities;assembly=LitwareActivities">
<Litware:WriteLineActivity Message="Hello, WF"/>
</SequentialWorkflowActivity>
Answer: A

Microsoft   70-504-VB originale fragen   70-504-VB   70-504-VB   70-504-VB

NO.10 You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5. The
application uses a sequential workflow as shown in the following exhibit. (Click the Exhibit button for the
sequential workflow image.)
The workflow implements an if condition as shown in the following exhibit. (Click the Exhibit button for the
if condition image.)
A new business policy requires the application to check if the amount is less than 15,000 instead of the
current default.
You write the following code segment in the host application. (Line numbers are included for reference
only.)
01 Dim newAmount As Int32 = 15000
02 Dim workflowchanges As _
03 New WorkflowChanges(instance.GetWorkflowDefinition())
04 Dim transient As CompositeActivity = _
05 workflowchanges.TransientWorkflow
06 Dim ruleDefinitions As RuleDefinitions = CType( _
07 transient.GetValue(ruleDefinitions. _
08 RuleDefinitionsProperty), RuleDefinitions)
09 Dim conditions As RuleConditionCollection = _
10 ruleDefinitions.Conditions
11
12 TryCast(condition1.Expression, _
13 CodeBinaryOperatorExpression).Right = _

NO.11 You are writing a sequential console workflow that consists of a delay activity and a code activity, as
shown in the exhibit. (Click the Exhibit button for the sequential console workflow image.)
In the execution code of the second activity, you try to modify the workflow as follows:
Private Sub delayActivity_InitializeTimeoutDuration(ByVal sender As System.Object, ByVal e As
System.EventArgs)
Console.Title = "Modifiability of a Workflow"
Console.WriteLine("Wait ...")
End Sub
Private Sub codeActivity_ExecuteCode(ByVal sender As System.Object, ByVal e As System.EventArgs)
Dim delay As DelayActivity = CType(sender, DelayActivity)
Console.WriteLine(delay.Name)
Dim workflowChanges As New WorkflowChanges(Me)
Dim codeActivity As New CodeActivity()
codeActivity.Name = "codeActivity2"
AddHandler codeActivity.ExecuteCode, AddressOf Me.codeActivity2_ExecuteCode
workflowChanges.TransientWorkflow.Activities.Add(codeActivity)
Me.ApplyWorkflowChanges(workflowChanges)
End Sub
Private Sub codeActivity2_ExecuteCode(ByVal sender As System.Object, ByVal e As System.EventArgs)
Dim codeActivity As CodeActivity = CType(sender, CodeActivity)
Console.WriteLine(codeActivity.Name)
Console.ReadLine()
End Sub
You also have set the modifiability of the workflow to a code condition that is set to the following function:
Private Sub UpdateCondition(ByVal sender As System.Object, ByVal e As ConditionalEventArgs)
If (TimeSpan.Compare(Me.delayActivity.TimeoutDuration, New TimeSpan(0, 0, 5)) > 0) Then
e.Result = False
Else
e.Result = True
End If
End Sub
Which code segment should you use to handle the exception?
A. workflowChanges.TransientWorkflow.Activities.Add(codeActivity)
Try
Me.ApplyWorkflowChanges(workflowChanges)
Catch ex As ArgumentOutOfRangeException
Console.WriteLine(ex.GetType().ToString())
Console.ReadLine()
End Try
B. workflowChanges.TransientWorkflow.Activities.Add(codeActivity)
Try
Me.ApplyWorkflowChanges(workflowChanges)
Catch ex As InvalidProgramException
Console.WriteLine(ex.GetType().ToString())
Console.ReadLine()
End Try
C. workflowChanges.TransientWorkflow.Activities.Add(codeActivity)
Try
Me.ApplyWorkflowChanges(workflowChanges)
Catch ex As InvalidOperationException
Console.WriteLine(ex.GetType().ToString())
Console.ReadLine()
End Try
D. workflowChanges.TransientWorkflow.Activities.Add(codeActivity)
Try
Me.ApplyWorkflowChanges(workflowChanges)
Catch ex As OverflowException
Console.WriteLine(ex.GetType().ToString())
Console.ReadLine()
End Try
Answer: C

Microsoft exam fragen   70-504-VB exam fragen   70-504-VB   70-504-VB prüfungsunterlagen

NO.12 You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5. The
application uses a sequential workflow.
The host application creates a workflow instance and stores it in a variable named instance. When the
workflow is executed, a business requirement requires the workflow execution to pause for a few minutes.
The host uses the following code segment.
Dim runtime As New WorkflowRuntime()
Dim instance As WorkflowInstance = _
runtime.CreateWorkflow(GetType(MyWorkflow))
instance.Start()
You need to ensure that the following requirements are met:
The workflow execution is temporarily paused.
The workflow state is preserved in memory.
Which line of code should you use?
A. instance.Unload()
B. instance.TryUnload()
C. instance.Suspend(Nothing)
D. instance.Terminate(Nothing)
Answer: C

Microsoft prüfungsfrage   70-504-VB prüfungsunterlagen   70-504-VB   70-504-VB prüfungsfrage

NO.13 You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5. The
application contains a state workflow.
You write the following code segment.
Dim amount As Integer = 10
Dim runtime As New WorkflowRuntime()
Dim instance As WorkflowInstance = _
runtime.CreateWorkflow(GetType(DynamicUpdateWorkflow))
instance.Start()
Dim smwi As New StateMachineWorkflowInstance(runtime, _
instance.InstanceId)
A dependency property named Status is defined in this workflow.
The value of a variable named amount is used to set the state of the workflow.
You need to ensure that the host application changes the state of the workflow on the basis of the value of
the amount variable.
What are the two possible code segments that you can use to achieve this goal? (Each correct answer
presents a complete solution. Choose two.)
A. If amount >= 1000 Then
smwi.SetState("HighValueState")
Else
smwi.SetState("LowValueState")
End If
B. If amount >= 1000 Then
smwi.StateMachineWorkflow.SetValue _
(DynamicUpdateWorkflow.StatusProperty, "HighValueState")
Else
smwi.StateMachineWorkflow.SetValue _
(DynamicUpdateWorkflow.StatusProperty, "LowValueState")
End If
C. If amount >= 1000 Then
instance.GetWorkflowDefinition().SetValue
(DynamicUpdateWorkflow.StatusProperty, "HighValueState")
Else
instance.GetWorkflowDefinition().SetValue
(DynamicUpdateWorkflow.StatusProperty, "LowValueState")
End If
D. If amount >= 1000 Then
Dim high As StateActivity = _
CType(smwi.StateMachineWorkflow.Activities("HighValueState"), _
StateActivity)
smwi.SetState(high)
Else
Dim low As StateActivity = _
CType(smwi.StateMachineWorkflow.Activities("LowValueState"), _
StateActivity)
smwi.SetState(low)
End If
Answer: A AND D

Microsoft   70-504-VB   70-504-VB   70-504-VB prüfungsunterlagen   70-504-VB antworten

NO.14 You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5.
The application contains the following code segment.
<ExternalDataExchange()> _
Public Interface IOrderService
Function CreateOrder(ByVal customerId As String) As Boolean
Function CancelOrder(ByVal orderId As String) As Boolean
Function SuspendOrder(ByVal ordered As String) As Boolean
End Interface
You need to create workflow activities that correspond to each operation in the IOrderService interface.
You also need to ensure that the activities use the C# programming language.
Which utility should you use?
A. wfc.exe
B. csc.exe
C. wca.exe
D. vbc.exe
Answer: C

Microsoft antworten   70-504-VB dumps   70-504-VB prüfungsunterlagen

NO.15 You are creating a Windows Workflow Foundation workflow by using Microsoft .NET Framework 3.5.
The workflow host must receive data from workflow instances by using a communication service named
CustomerDataExchange.
You need to configure the workflow runtime services to enable communication between the host and the
workflow instances.
Which code segment should you use?
A. Dim runtime As New WorkflowRuntime()
Dim cde As New CustomerDataExchange()
runtime.AddService(cde)
B. Dim runtime As New WorkflowRuntime()
Dim cde As New CustomerDataExchange()
Dim dataService As New ExternalDataExchangeService()
dataService.AddService(cde)
C. Dim runtime As New WorkflowRuntime()
Dim dataService As New ExternalDataExchangeService()
Dim cde As New CustomerDataExchange()
dataService.AddService(cde)
runtime.AddService(dataService)
D. Dim runtime As New WorkflowRuntime()
Dim dataService As New ExternalDataExchangeService()
runtime.AddService(dataService)
Dim cde As New CustomerDataExchange()
dataService.AddService(cde)
Answer: D

Microsoft   70-504-VB   70-504-VB prüfungsfragen   70-504-VB zertifizierungsfragen

NO.16 You use a built-in tracking service to track specific workflow parameters.
You need to check whether the workflow parameters have been stored in the tracking database.
What should you do? (Each correct answer presents part of a solution. Choose two.)
A. Display the contents of the WorkflowInstance table of the tracking database.
B. Include the SqlTrackingQuery class in a code segment to retrieve tracked workflows and
SqlTrackingWorkflowInstance class to inspect them.
C. Use the ActivityTrackingLocation class to determine if the value has been set to a database.
D. Display the contents of the TrackingDataItem table of the tracking database.
Answer: B AND D

Microsoft   70-504-VB exam fragen   70-504-VB exam fragen   70-504-VB   70-504-VB

NO.17 You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5.
A Windows Forms application functions as the workflow host by using the
DefaultWorkflowSchedulerService.
You create a WorkflowRuntime instance in the Load event of the forms. You also subscribe to the
WorkflowCompleted event.
You need to ensure that the application displays the message in the Label control named lblStatus when
the WorkflowCompleted event is raised.
Which code segment should you use?
A. Private Sub UpdateInstances(ByVal id As Guid)
If Me.InvokeRequired Then
lblStatus.Text = id.ToString & " completed"
End If
End Sub
B. Private Sub UpdateInstances(ByVal id As Guid)
If (Not Me.InvokeRequired) Then
lblStatus.Text = id.ToString & " completed"
End If
End Sub
C. Private Delegate Sub UpdateInstancesDelegate(ByVal id As Guid)
Private Sub UpdateInstances(ByVal id As Guid)
If Me.InvokeRequired Then
Me.Invoke(New _
UpdateInstancesDelegate(AddressOf UpdateInstances), _
New Object() {id})
Else
lblStatus.Text = id.ToString & " completed"
End If
End Sub
D. Private Delegate Sub UpdateInstancesDelegate(ByVal id As Guid)
Private Sub UpdateInstances(ByVal id As Guid)
If Not Me.InvokeRequired Then
Me.Invoke(New _
UpdateInstancesDelegate(AddressOf UpdateInstances), _
New Object() {id})
Else
lblStatus.Text = id.ToString & " completed"
End If
End Sub
Answer: C

Microsoft prüfung   70-504-VB echte fragen   70-504-VB   70-504-VB prüfungsunterlagen   70-504-VB dumps

NO.18 instance.ApplyWorkflowChanges(workflowchanges)
You need to build a host application that modifies the condition according to the business requirement in
workflow instances that are currently executing.
Which code segment should you insert at line 11?
A. Dim condition1 As RuleExpressionCondition = _
CType(conditions("Check"), RuleExpressionCondition)
B. Dim condition1 As RuleExpressionCondition = _
CType(conditions("ifElseBranch1"), _
RuleExpressionCondition)
C. Dim condition1 As RuleExpressionCondition = _
CType(conditions("ifElseBranch2"), _
RuleExpressionCondition)
D. Dim condition1 As RuleExpressionCondition = _
CType(conditions("Declarative Rule Condition"), _
RuleExpressionCondition)
Answer: A

Microsoft prüfung   70-504-VB   70-504-VB antworten   70-504-VB prüfungsfrage   70-504-VB   70-504-VB dumps
14. You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5.
You plan to add a workflow to the application. You add a HandleExternalEvent activity named InitiatePO
to the workflow.
You need to ensure that the workflow responds only to events raised by the members of the Active
Directory role named Managers.
Which code segment should you use?
A. Private Sub OnSetupRoles(ByVal sender As Object, ByVal e As EventArgs)
Dim poInitiators As New WorkflowRoleCollection()
Dim poInitiatorsRole As ActiveDirectoryRole = _
ActiveDirectoryRoleFactory.CreateFromAlias("Managers")
poInitiators.Add(poInitiatorsRole)
InitiatePO.Roles = poInitiators
End Sub
B. Private Sub OnSetupRoles(ByVal sender As Object, ByVal e As EventArgs)
Dim poInitiators As New WorkflowRoleCollection()
Dim poInitiatorsRole As ActiveDirectoryRole = _
ActiveDirectoryRoleFactory.CreateFromAlias("Managers")
InitiatePO.Roles = poInitiators
End Sub
C. Private Sub OnSetupRoles(ByVal sender As Object, ByVal e As EventArgs)
Dim poInitiators As New WorkflowRoleCollection()
Dim poInitiatorsRole As ActiveDirectoryRole = _
ActiveDirectoryRoleFactory.CreateFromAlias("Managers")
poInitiators.Add(poInitiatorsRole)
InitiatePO.Roles.Contains(poInitiatorsRole)
End Sub
D. Private Sub OnSetupRoles(ByVal sender As Object, ByVal e As EventArgs)
Dim poInitiators As New WorkflowRoleCollection()
Dim poInitiatorsRole As ActiveDirectoryRole = _
ActiveDirectoryRoleFactory.CreateFromAlias("Managers")
poInitiators.Add(poInitiatorsRole)
End Sub
Answer: A

Microsoft zertifizierung   70-504-VB   70-504-VB
15. You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5. The
application uses a sequential workflow that meets the following requirements:
The workflow application calls an external method to simultaneously notify two users about a task.
The host application raises the TaskCompleted event after each user completes a task.
The workflow has two HandleExternalEvent activities that handle the TaskCompleted event in parallel for
two users.
You need to ensure that each TaskCompleted event is handled by the HandleExternalEvent activity
mapped to the respective user.
Which code segment should you use?
A. <ExternalDataExchange()> _
Public Interface ITaskService
Sub CreateTask(ByVal taskId As String, ByVal assignee As String, _
ByVal text As String)
Event TaskCompleted As EventHandler(Of TaskEventArgs)
End Interface
B. <ExternalDataExchange()> _
Public Interface ITaskService
Sub CreateTask(ByVal taskId As String, ByVal assignee As String, _
ByVal text As String)
<CorrelationAlias("taskId", "e.Id")> _
<CorrelationInitializer()> _
Event TaskCompleted As EventHandler(Of TaskEventArgs)
End Interface
C. <ExternalDataExchange()> _
Public Interface ITaskService
<CorrelationInitializer()> _
Sub CreateTask(ByVal taskId As String, ByVal assignee As String, _
ByVal text As String)
<CorrelationAlias("taskId", "e.Id")> _
Event TaskCompleted As EventHandler(Of TaskEventArgs)
End Interface
D. <ExternalDataExchange()> _
<CorrelationParameter("taskId")> _
Public Interface ITaskService
<CorrelationInitializer()> _
Sub CreateTask(ByVal taskId As String, ByVal assignee As String, _
ByVal text As String)
<CorrelationAlias("taskId", "e.Id")> _
Event TaskCompleted As EventHandler(Of TaskEventArgs)
End Interface
Answer: D

Microsoft   70-504-VB prüfungsfrage   70-504-VB antworten

NO.19 You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5. The
application uses a sequential workflow.
The workflow is implemented in a class named ProcessOrders. The workflow contains a dependency
property named EmployeeID.
You need to ensure that the EmployeeID property is assigned a value when the host application tries to
create a new workflow instance.
Which code segment should you use?
A. Dim runtime As New WorkflowRuntime()
Dim processOrders As New ProcessOrders()
processOrders.EmployeeID = "NBK"
Dim instance As WorkflowInstance = _
runtime.CreateWorkflow(GetType(ProcessOrders))
B. Dim runtime As New WorkflowRuntime()
Dim processOrders As New ProcessOrders()
processOrders.SetValue( _
processOrders.EmployeeIDProperty, "NBK")
Dim instance As WorkflowInstance = _
runtime.CreateWorkflow(GetType(ProcessOrders))
C. Dim runtime As New WorkflowRuntime()
Dim dict As Dictionary(Of String, Object) = _
New Dictionary(Of String, Object)()
dict.Add("EmployeeID", "NBK")
Dim instance As WorkflowInstance = _
runtime.CreateWorkflow(GetType(ProcessOrders), dict)
D. Dim runtime As New WorkflowRuntime()
Dim dict As Dictionary(Of String, Object) = _
New Dictionary(Of String, Object)()
dict.Add("EmployeeIDProperty", "NBK")
Dim instance As WorkflowInstance = _
runtime.CreateWorkflow(GetType(ProcessOrders), dict)
Answer: C

Microsoft   70-504-VB   70-504-VB

NO.20 You create a Windows Workflow Foundation application by using Microsoft .NET Framework 3.5. You
use the state machine workflow in the application.
You plan to implement a mechanism that allows a host application to query a state machine workflow
instance that is currently executing.
You write the following code segment. (Line numbers are included for reference only.)
01 Dim runtime As New WorkflowRuntime()
02 Dim instance As WorkflowInstance = _
03 runtime.CreateWorkflow(GetType(Workflow1))
04 instance.Start()
05
You need to identify the current state of the workflow.
Which code segment should you insert at line 05?
A. Dim currentstate As String = instance.GetWorkflowDefinition().ToString
B. Dim currentstate As String = _
instance.GetWorkflowDefinition().ExecutionStatus.ToString
C. Dim smwi As New StateMachineWorkflowInstance(runtime, _
instance.InstanceId)
Dim currentstate As String = smwi.StateHistory(0)
D. Dim smwi As New StateMachineWorkflowInstance(runtime, _
instance.InstanceId)
Dim currentstate As String = smwi.CurrentStateName
Answer: D

Microsoft   70-504-VB   70-504-VB testantworten

Wenn Sie sich noch anstrengend um die Microsoft 70-504-VB Zertifizierungsprüfung bemühen, dann haben Sie einen großen Fehler gemacht. Durch fleißiges Lernen können Sie sicher die Prüfung bestehen. Aber Sie können vielleicht das erwartete Ziel vielleicht nicht erreichen. Im Zeitalter des Internets gibt es zahlreiche erfolgreiche IT-Zertifizierungen. Die Schulungsunterlagen zur Microsoft 70-504-VB Zertifizierungsprüfung von Pass4Test sind sehr gut. Sie sind zielgerichtet und verprechen Ihnen, die Prüfung zu bestehen. Diese Schulungsunterlagen sind nicht nur rational, sondern erspart Ihnen auch viel Zeit. Sie können mit der ersparten Zeit etwas anderes lernen. So können Sie bessere Resultate bei weniger Einsatz erzielen.